Universal Front & Rear Parking Sensors

PD1 Rear Parking Sensor

PD1 Rear Parking Sensor provides your car with full rear bumper protection when parking and reversing, alerting you to approaching objects via an audible speaker.

When reverse gear is engaged the PD1 Rear parking sensor provides an instant, automatic, self-diagnostic function that maps out the surrounding area of your rear bumper constantly monitoring this as you reverse with 100% accuracy, providing you with 3 different audible tones (Zones) alerting you of your proximity in relation to surrounding objects!

• Alert: Audible
• Protection: Rear
• Activation: Reverse

The full length of your bumper (including the sides) is protected with an ever increasing beeping sound.

As you reverse, Zone 1 (furthest away from your vehicle) detects the approaching object first.

Zone 1: 80 to 50 cm in length - The 1st tone signals with a slow "be-be-be" sound

Zone 2: 50 to 25 cm in length - The 2nd tone is a faster "be-be-be" sound

Zone 3: 25cm and less - the 3rd tone is a constant "beeeeeep" sound

Here is what you will get if you order the Parking Dynamics PD1 Rear today!

A. The Speaker is small and at just 20mm in diameter mounts anywhere inside of the vehicle and can be run to any location. The audible tones that are emitted to alert you of the proximity of surrounding objects can be clearly heard even when mounted at the back of the vehicle close to or behind interior panels.

B. The Electronic Control Unit (ECU) is the 'brain' of the PD1, and mounts securely using the supplied adhesive strip either inside of the boot or behind the vehicle bumper. The front ECU mounts under the bonnet or inside of the car, typically behind the glove box. Dimensions of this compact rear sensor unit are just (L57mm x H13mm x D33mm) and the front sensor dimensions are (L75mm x H23mm x D40mm)

C. The Antenna is a very strong and flexible adhesive metallic tape that mounts behind the bumper. Its 1cm height and 2.7m length gives you flexibility to run over bumper curves and round bumper mouldings and ensures 100% bumper coverage of even the largest vehicle, offering a full, all round protection zone. The antenna can be cut to any length in seconds.

Universal Installation Instructions are included covering the easy 3-wire installation enabling any basic DIYer to install the PD1 parking sensor without any problems making the installation simple, safe and secure.

PD1 Front Parking Sensor

PD1 Front Parking Sensor provides your car with full front bumper protection when parking, alerting you to approaching objects via an audible speaker.

Activate the PD1 Front parking sensor by pressing the included push-button switch that mounts discretely in the area under your steering wheel for easy access. When activated the parking sensor system provides an instant, automatic, self-diagnostic function that maps out the surrounding area of your front bumper constantly monitoring this as you manoeuvre with 100% accuracy, providing you with different audible tones (Zones) alerting you of your proximity in relation to surrounding objects!

• Alert: Audible
• Protection: Front
• Activation: Switch

The full length of your bumper (including the sides) is protected with an ever increasing beeping sound.

As you move forwards, Zone 1 (furthest away from your vehicle) detects the approaching object first.

Zone 1: 70 cm to 20 cm in length - The 1st tone signals with a "be-be-be" sound increasing in frequency as you approach the obstacle

Zone 2: From 15 to 20 cm away from the obstacle - The 2nd tone is a low frequency "beeeeep" sound

*The PD1 Front is acutely sensitive and enables you to park in very tight spaces.

Here is what you will get if you order the Parking Dynamics PD1 Front today!

A. The Speaker is small and at just 20mm in diameter mounts anywhere inside of the vehicle and can be run to any location. The audible tones that are emitted to alert you of the proximity of surrounding objects can be clearly heard even when mounted at the back of the vehicle close to or behind interior panels.

B. The Electronic Control Unit (ECU) is the 'brain' of the PD1, and mounts securely using the supplied adhesive strip either inside of the boot or behind the vehicle bumper. The front ECU mounts under the bonnet or inside of the car, typically behind the glove box. Dimensions of this compact rear sensor unit are just (L57mm x H13mm x D33mm) and the front sensor dimensions are (L75mm x H23mm x D40mm)

C. The Antenna is a very strong and flexible adhesive metallic tape that mounts behind the bumper. Its 1cm height and 2.7m length gives you flexibility to run over bumper curves and round bumper mouldings and ensures 100% bumper coverage of even the largest vehicle, offering a full, all round protection zone. The antenna can be cut to any length in seconds.

D. The Switch included with the PD1-Front only, mounts discretely inside of the vehicle typically under the steering wheel area for easy access. Press the push-button switch to activate the PD1-Front when parking.

Universal Installation Instructions are included covering the easy 3-wire installation enabling any basic DIYer to install the PD1 parking sensors without any problems making the installation simple, safe and secure.

PD1 Vision Rear Parking Sensor

PD1 Vision Rear Parking Sensor provides your car with full rear bumper protection when parking and reversing, alerting you to approaching objects via an audible speaker and LED display.

When reverse gear is engaged the PD1 Vision rear parking sensor provides an instant, automatic, self-diagnostic function that maps out the surrounding area of your rear bumper constantly monitoring this as you reverse with 100% accuracy, providing you with 3 different audible tones and visual LED's (Zones) alerting you of your proximity in relation to surrounding objects.

• Alert: Visual & Audible
• Protection: Rear
• Activation: Reverse

The full length of your bumper (including the sides) is protected with an ever increasing alert system. The PD1 Vision provides you with 3 distinctive visual colour LEDs on the interior mirror mounted display: Green, Yellow and Red. The displays works simultaneously with the audible tones giving you multi-featured alert system.

As you reverse, Zone 1 (furthest away from your vehicle) detects the approaching object first.

Zone 1: 80 to 50 cm in length - The 1st tone signals with a slow "be-be-be" sound and the green lights display.

Zone 2: 50 to 25 cm in length - The 2nd tone is a faster "be-be-be" sound and the yellow lights display.

Zone 3: 25cm and less - the 3rd tone is a constant "beeeeeep" sound and the red lights display.

Here is what you will get if you order the Parking Dynamics PD1 Vision today!

B. The Electronic Control Unit (ECU) is the 'brain' of the PD1, and mounts securely using the supplied adhesive strip either inside of the boot or behind the vehicle bumper. The front ECU mounts under the bonnet or inside of the car, typically behind the glove box. Dimensions of this compact rear sensor unit are just (L57mm x H13mm x D33mm) and the front sensor dimensions are (L75mm x H23mm x D40mm)

C. The Antenna is a very strong and flexible adhesive metallic tape that mounts behind the bumper. Its 1cm height and 2.7m length gives you flexibility to run over bumper curves and round bumper mouldings and ensures 100% bumper coverage on even the largest vehicle, offering a full, all round protection zone. The antenna can be cut to any length in seconds.

E. The LED Display with Integrated Speaker included with the PD1-Vision only, mounts discretely on the rear view mirror and gives you visual and audible alerts to inform you of the proximity of surrounding objects. LED Display Dimensions (L90mm x H30mm x D12mm)

Universal Installation Instructions are included covering the easy 3-wire installation enabling any basic DIYer to install the PD1 parking sensors without any problems making the installation simple, safe and secure.